Chapter 1 Hardware Configuration 5
1.3 Specifications
1.3.1 System
• CPU: Intel Pentium
®
III processor up to 933 MHz, Celeron
®
up to
733 MHz, FSB 66/100/133 MHz.
• Firmware hub: Provides security enhancements on computer
platforms by supporting Random Number Generator (RNG).
• BIOS: Award Flash BIOS.
• System Chipset: Intel
®
815E.
• PCI enhanced IDE hard disk drive interface: Supports up to four
IDE (AT-bus) large hard disk drives or other enhanced IDE
devices. Supports PIO mode 4 (16.67 MB/s data transfer rate) and
Ultra ATA 100/66/33 (100/66/33 MB/s data transfer rate). BIOS
enabled/disabled.
• Floppy disk drive interface: Supports up to two floppy disk
drives, 5¼" (360 KB and 1.2 MB) and/or 3½" (720 KB, 1.44 MB,
and 2.88 MB). BIOS enabled/disabled.
1.3.2 Memory
• RAM: Up to 512 MB in three available 168-pin DIMM sockets.
Supports PC100/ PC133-compliant SDRAMs.
• ECC (parity DRAM): not supported.
1.3.3 Input/Output
• Bus interface: PCI/ISA bus, PICMG compliant.
• Enhanced parallel port: Configurable to LPT1 or disabled.
Standard DB-25 female connector provided. Supports EPP/ECP.
• Serial ports: Two RS-232 ports with 16C550 UARTs (or
compatible) with 16-byte FIFO buffer. Supports speeds up to 115.2
Kbps. Ports can be individually configured to COM1, COM2, or
disabled.
