Aerco Brand's Products

System Release 6.1 cPCI for Windows Release Guide — May 2006 26

• Intel NetStructure

MPCHC5085/MPCBL5524A1C (Dual CPU) with up to a maximum

of 4 GB RAM

• Intel NetStructure

MPCHC5085/MPCBL5524A1D (Single CPU) with up to a

maximum of 4 GB RAM

• Intel NetStructure

MPCHC5091/ZT5524A-1A

• Intel NetStructure

MPCHC5091/ZT5524A-1B

• Intel NetStructure

MPCHC5091/MPCBL5524A1C

• Intel NetStructure

MPCHC5091/MPCBL5524A1D

• Intel NetStructure

ZT5085/MPCBL5525 or MPCHC5085/MPCBL5525

• Intel NetStructure

MPCHC5091/MPCBL5525

Note: For information about installing the Hot Swap Kit (HSK), refer to the Pigeon

Point Systems Hot Swap Kit User Guide, which is a PDF file located in the

HSK directory with the System Release 6.1 cPCI for Windows software. For

information about using PHS software, refer to the Software Installation

Guide, Administration Guide, and High Availability Demo Guide.

• Advantech MIC-3038A/8-4R with MIC-3358 SBC

• Advantech MIC-3041/MIC-3389

• Advantech MIC-3081/MIC-3369

• Westek P5100/Advantech MIC-3358

Redundant Host (RH)

System Release 6.1 cPCI for Windows supports Active/Standby Redundant Host (RH)

and Peripheral Hot Swap (PHS) software on the following chassis/Single Board Computer

(SBC):

Notes:1. RH is supported on Windows 2000 SP4 and on SBCs with up to 4 GB RAM where the

SBC supports it.

2. To fully support the capabilities of the Hot Swap Kit (HSK) and RH on the Intel

NetStructure

ZT5085 chassis, the xx5524 SBC requires the Intel NetStructure

ZT4901 mezzanine board installed with it.

3. For more information about chassis/SBC, go to the following URL:

http://www.intel.com/design/network/products/cbp/cpci/index.htm

• Intel NetStructure

ZT5085/ZT5524A-1A (Dual CPU)

• Intel NetStructure

ZT5085/ZT5524A-1B (Single CPU)

• Intel NetStructure

MPCHC5085/ZT5524A-1A (Dual CPU)

• Intel NetStructure

MPCHC5085/ZT5524A-1B (Single CPU)

• Intel NetStructure

MPCHC5085/MPCBL5524A1C (Dual CPU) with up to a maximum

of 4 GB RAM