22
These instructions are continued from Chapter 1.
Turn the < > dial to select [Address setting],
and then press < >.
If you have set the DNS server setting to
[Disable], the screen at left is displayed.
Press < > to select the input position, and then
turn the < > dial to enter the IP address of the
FTP server.
If you have set the DNS server IP address setting
to [Auto assign] or [Manual setting], the screen
at left is displayed.
For instructions on screen operations, refer to
“Virtual Keyboard Operation” (p.20).
Enter the FTP server’s server name or IP address.
In [Port No.], enter 00021, in most cases.
Turn the < > dial to select [OK], and then press
< > to go to the next screen.
Complete the [Proxy server] settings.
Turn the < > dial to select [OK], and then press
< > to go to the next screen.
Configuring FTP Communication Settings
