5.1 Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
P1
ECO
10.2 0.932 225
P2
AUTOSENSE
7 - 14 0.6 - 1.4 40 - 150
P3
PROZONE
14 - 16 1.2 - 1.5 139 - 149
P4
PRO
12.5 - 14.5 1.4 - 1.6 154 - 164
P5
GLASS
12 - 14 0.7 - 0.9 75 - 85
P6
30MIN
10 0.9 30
P7
PREWASH
4 0.1 14
P8
EXTRA SILENT
9 - 10 1.0 - 1.2 219 - 229
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:
Write down the product number (PNC)
that is on the rating plate.
6. SETTINGS
6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
• The activation or the deactivation of
the acoustic signal for end of
programme.
• The activation or deactivation of the
rinse aid dispenser.
• The level of rinse aid according to the
required dosage.
These settings will be saved until you
change them again.
How to set the programme
selection mode
The appliance is in programme selection
mode when the display shows the
programme number P1.
When you activate the appliance, usually
it is in programme selection mode.
However, if this does not happen, you
www.aeg.com8
