Manual adjustment
Turn the water hardness dial to the position 1 or
2 (refer to the table).
Electronic adjustment
1. Open the menu option.
2. Go to SETTINGS .
3. Press the OK START button to open the submenu.
4. Go to WATER HARDNESS .
5. Press the OK START button.
6. Set the level of the water softener.
7. Press the OK START button.
8. Press the OPTION button to close the menu option.
USE OF DISHWASHER SALT
Filling the salt container
1. Turn the cap counterclockwise and open
the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
When it is necessary to fill the salt container,
the display shows the message REFILL SALT . The message does not show while a washing
programme operates.
After you fill the salt container, the display can continue to show the message for some
hours. This does not have an unwanted effect on the operation of the appliance
It is correct that water comes out from the salt container when you fill it with salt.
Use of dishwasher salt
13
