2. Fill the detergent dispenser (A) with de-
tergent. The marking shows the dosage:
20 = approximately 20 g of detergent
30 = approximately 30 g of detergent.
A
B
3. If you use a washing program with pre-
wash, put more detergent in the prewash
detergent compartment (B).
4. If you use detergent tablets, put the de-
tergent tablet in the detergent dispenser
(A) .
5. Close the lid of the detergent dispenser.
Press the lid until it locks into position.
Multitab function
The multitab function is for combi detergent
tablets.
These tablets contain agents such as deter-
gent and rinse aid. Some types of tablets can
contain other agents.
For the use of these tablets, refer to the in-
structions from the manufacturer.
The multitab function can be set with any
program.
When you set the multitab function, it stays
on until you deactivate it.
The multitab function automatically stops the
rinse aid operation. The rinse aid message is
deactivated.
The program duration can increase if you use
the multitab function.
Activate or deactivate the multitab func-
tion before the start of a washing pro-
gram.
You cannot activate or deactivate the
multitab function when the program op-
erates. Cancel the washing program,
then set the program again.
Follow these steps if the drying re-
sults are not satisfactory:
1. Fill the rinse aid dispenser with rinse
aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position
2.
• You can only activate or deactivate
the rinse aid dispenser when the mul-
titab function is activated.
12 electrolux
