brane will result in food particles building
up over time eventually blocking the
dishwasher drain hose spigot
Our appliances are supplied with a
security device to protect against
the return of dirty water back into
the machine. If the spigot of your
sink has a "no return valve" incor-
porated this can prevent the correct
draining of your dishwasher. We
therefore advise you to remove it.
To avoid water leakage after instal-
lation make sure that the water cou-
plings are tight.
Electrical connection
Safety standards require the appli-
ance to be earthed.
Prior to using the appliance for the
first time, ensure that the rated volt-
age and type of supply on the rating
plate match that of the supply where
the appliance is to be installed. The
fuse rating is also to be found on the
rating plate
Always plug the mains plug into a
correctly installed shockproof
socket.
Multi-way plugs, connectors and ex-
tension cables must not be used.
This could constitute a fire hazard
through overheating.
If necessary, have the domestic wir-
ing system socket replaced. In case
that the electrical cable has to be
replaced, contact your local Service
Force centre.
The plug must be accessible after
the appliance has been installed.
Never unplug the appliance by pull-
ing on the cable. Always pull the
plug.
The manufacturer accepts no
liability for failure to observe the
above safety precautions.
32 electrolux electrical connection
