BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
5019 300 02817
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
PROGRAM
SELECTION
BUTTON
Push “P” button
(repeatedly) until
selected program
number is shown
on the display
(P1...Px) -
see “Table of
programs” -
next page.
After 3 seconds
the cycle
remaining time is
displayed.
START/PAUSE/
RESUME BUTTON
Push this button to start
the selected program:
the indicator lights up
and goes off at the end
of the program.
Press Start button or
open the door during
washing cycle to pause
the cycle - the Start
Indicator blinks.
To resume the cycle
push Start button and
close the door.
CANCEL/OFF
BUTTON
Push this button to switch
off the control panel.
If pressed for 3 seconds
when a program is running
it cancels this program. If
pressed for 3 seconds
when the dishwasher is
off, it drains the water out.
If pressed during program
and delayed start selection
it cancels the selection and
returns to previous cycle
and option selection.
ECO PROGRAM
INDICATOR
When lit, it indicates that
standard program is active.
MULTIZONE
INDICATOR
When lit, it indicates the
wash in the upper or lower
rack only.
KEYBOARD LOCK
INDICATOR
When lit, it indicates that
keyboard lock is active.
WATER TAP CLOSED
- Alarm
Blinks when there is no inlet
water or water tap is closed.
WASH TIME DISPLAY
Indicates the cycle duration and the remaining time (h:min). With “Delayed start”
selected it indicates the time remaining until program start: “h24” if above
10 hours delay time remain and “h:mm” if below 10 hours delay time remain.
If “Fx Ey” messages appears on the display, see page 9 - chapter “What to do if...”.
DELAY INDICATOR
When lit, it indicates that delay
is active.
SALT INDICATOR
When lit (at the end of the
cycle), the salt reservoir needs
to be refilled.
MULTIZONE
Allows you to choose
the washing zones. The
appliance washes both
racks by default
(indicators are not lit).
To wash only in specific
rack, press this button
repeatedly:
KEYBOARD LOCK
This option allows you
to lock the buttons on
the control panel.
Children will not be
able to accidentally
start the dishwasher by
pressing the buttons on
the control panel when
this option is selected.
If you want to activate
this option hold down
the button for
3seconds.
Repeat the same
operation to unlock the
panel.
only upper rack
(including
cutlery rack)
indicator lit
only lower rack
indicator lit
ANTIBACTERIAL RINSE
This function activates an
antibacterial rinse at the end of the
wash cycle, guaranteeing a further
reduction of bacteria.
Press the button to activate or deactivate
the function.
This function can be used with the
programs indicated in the table of
programs.
The dishwasher door must be kept shut
for the entire duration of the program in
order to guarantee reduction of bacteria.
If the door is opened the indicator lamp
starts flashing.
DELAYED START
BUTTON
Push the button (repeatedly)
to delay the start of the
program. Adjustable from
0:30 to 24 hours. With each
press of the button, the delay
start increases by: 0:30 if
selection below 4 hours, 1:00
if selection is below 12 hours,
4 hours if selection is above
12 hours. If 24 hours reached,
and the button is pressed, the
delayed start is deactivated -
“OFF” message is shown.
Then press the START
button. The delay time can be
adjusted after Start key press.
The dishwasher will start after
the set time.
POWERCLEAN
®
Thanks to the additional power jets this
option provides a more intensive and
powerful wash in the lower rack, in the
specific area.
RINSE AID
INDICATOR
When lit (at the end of the
cycle), the rinse aid dispenser
needs to be refilled.
