EN -1-
Chart
PROGRAMS
SELECTION
BUTTON
Push “Programs” button
(repeatedly) until the
indicator of the required
program lights up (see
“Table of programs” –
next page).
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
DELAYED START
BUTTON
The wash cycle can be
programmed to start
after 2, 4 or 8 hours.
Then press the Start
button.
The wash program will
start after the set time.
START/RESUME
BUTTON
Push this button to start
the selected program:
the indicator lights up
and goes off at the end of
the program.
When the door is
opened during a washing
cycle, the cycle is
temporarily paused: the
Start indicator blinks.
To resume the cycle
push Start button and
close the door within
3 seconds.
SALT
INDICATOR
When lit (at the
end of the cycle),
the salt reservoir
needs to be
refilled.
5019 300 00798
TABLET SETTING
This setting allows to
optimize the cycle
performances according
the type of detergent
used. Push the Tablet
button for 3 seconds
(until the indicator lights
up) if you are using the
combined detergents in
tablet (rinse aid, salt and
deteregent in 1 dose).
If you are using powder
detergent or liquid
detergent, the Tablet
indicator on the control
panel has to be off.
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
CANCEL/OFF
BUTTON
Push this button to switch
off the control panel.
If pressed when a
program is running it
cancels the program
ongoing draining water for
1 minute.
If pressed when the
dishwasher is switched off
it drains any possible
liquids from dishwasher
(1 minute process).
If the indicator flashes
repeatedly, see page 9 –
chapter “What to do if ...”.
RINSE AID
INDICATOR
When lit (at the
end of the cycle),
the rinse aid
dispenser needs
to be refilled.
Quick reference guide
