Assembly Instructions for
Adjustable Arm Rest No. CH55A
PARTS LIST
KEY
QTY
DESCRIPTION
1
2
P.U. ARMPADS
2
2
ARM PLATES
3
4
M6x15mm ARMREST SCREW
4
1
SUPPORTING BAR
5
2
LOCK WASHER
6
2
FLAT WASHER
7
2
ADJUSTMENT KNOB
8
4
M6x24mm SEAT PLATE SCREW
INSTRUCTIONS :
STEP 1
■ USE (8) M6x24mm SEAT PLATE SCREWS TO FIX THE (4) SUPPORTING BAR TO
YOUR CHAIR MECHANISM AS DRAWN BELOW.
STEP 2
■ ALIGN (1) P.U. ARMPADS TO (2) ARMPLATES AND SCREW-IN WITH (3) M6x15mm
ARMREST SCREWS. INSERT ASSEMBLED (1) P.U. ARMPADS AND (2) ARM
PLATES INTO (4) SUPPORTING BAR. ALIGN THE PRE-DRILLED HOLES OF (2)
ARM PLATES AND (4) SUPPORTING BAR AND THEN INSERT THE (7)
ADJUSTMENT KNOB WITH (5) LOCK WASHER & (6) FLAT WASHER UPWARD INTO
THE HOLE OF (4) SUPPORTING BAR AND TIGHTEN KNOBS FIRMLY.
WARNING !
USE THIS PRODUCT FOR SEATING ONLY ONE PERSON AT A TIME. DON'T USE AS STEP
LADDER.
DO NOT USE THIS CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE SECURELY
TIGHTENED.
AT LEAST EVERY SIX MONTHS, CHECK ALL BOLTS, SCREWS AND KNOBS TO BE SURE
THEY ARE SECURELY TIGHTENED.
IF ANY COMPONENT IS MISSING, DAMAGED OR WORN, STOP USE OF THE PRODUCT
UNTIL REPAIRS CAN BE MADE.CONTACT FOR FACTORY AUTHORIZED REPAIR PARTS,
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT TO SERIOUS INJURY.
