ZyAIR G-220 User’s Guide
Access Point Mode Configuration 3-3
3.2.1 Connecting to a Network
Follow the steps below to connect to a network.
Step 1. Click Refresh to scan for all available wireless networks within range.
Step 2. To join a network, either click an entry in the table to select a wireless network and then click
Connect this site or double-click an entry.
Step 3. If the WEP field displays On for the selected wireless network, the following screen displays.
Figure 3-2 Station Mode: Use Previous WEP Setting
Step 4. Click No to display the WEP Key Setting… screen and refer to Section 3.4 to set up WEP
keys. Otherwise click Yes to use the previously configured WEP settings.
Step 5. To verify that you have successfully connected to the selected network, check the network
information on the bottom of the ZyAIR USB Utility screen.
3.3 The More Setting… Screen
Click More Setting… in the ZyAIR Utility program to display the More Setting… screen as shown next.
