15
Printer Options Tab
Select the Printer Options tab (Figure 11) to display additional settings related to the
printing device. When a “Media Type” or “Preset” is selected on the “Color
Management” tab the default settings for that media are automatically selected, but can
be modified here.
• Enable Driver Options - allows a job sent through the RIP Driver to override
default settings on the plotter. Due to the fact that all the users may not have the
same knowledge level as the RIP operator, Xerox recommends that this option be
checked so that the RIP operator has a common workflow and knows what to
expect when the job is printed. The profiles for the media use these settings and
are set for optimal performance.
• Enable Media Option – Adjust various media setting depending upon media
type including the Step Adjust distance, Stiffness, Head Height, and Thickness.
• Enable File Saving Options – Not used on Xerox Wide Format Color Printers.
• Enable Heater Options – Set the default Heater temperatures. The profiles
specify these.
Note: If you want the selections made here to be part of a “Preset”, then you will
have to make your selections, Select the “Color Management” tab, Select “Preset
Pull-down”, Select “Save” (or Save As if new Preset), and Select the “Preset
Name” from the list.
