A timer switches off the system after approximately 12 minutes. The control light will go out
correspondingly.
Hazard warning flashers
The four-way flasher (located above the ashtray) should be used to indicate that the vehicle has become
a traffic hazard.
NOTE: Regulations regarding the use of the hazard warning flasher may vary from state to state.
pg. 24 Daytime running lights
Automatic daytime running lights
Screw A in the illustration (available on U.S. models only) is used to control the automatic daytime
running lights when the headlight switch is in position 0.
The low beams, tail lights, parking lights and license plate lights will come on automatically when the
ignition is switched on.
To adjust, press in the screw with a small screwdriver and turn to one of the following positions:
file:///K|/ownersdocs/2000/2000_C70CONV/00c70c_02b.htm (2 of 10)12/30/2006 3:39:49 PM
