US Robotics Markası'nın Ürünleri

English

The USRobotics Installation CD-ROM did not automatically

start when I inserted the Installation CD-ROM.

Solution:

If the CD does not start automatically, start it manually as follows:

1. Windows Vista: Click Windows Start > Computer.

Windows XP: Click Windows Start > My Computer.

Windows 2000: On the desktop, double-click My Computer.

2. Double-click the CD drive.

I accidentally clicked Cancel during the installation proce-

dure.

Solution:

Remove and re-insert the USRobotics Installation CD-ROM into your CD-

ROM drive. Repeat the installation procedure of the software before you install

any hardware.

My computer does not recognise the wireless adapter.

Solution:

The wireless adapter may not be properly connected. Make sure the wireless

adapter is fully seated into the connector on your computer.

The USRobotics

dx Configuration Utility does not find the

wireless network that I want to connect to.

Solution:

Windows Vista:

1. Right-click the configuration utility in the system tray and select Connect

Using Wizard.

2. Click Set up a connection or network.

3. Select Manually connect to a wireless network and click Next.

4. Follow the on-screen instructions to create a network profile and connect.

You may need the Network name, Security type, Encryption type and Secu-

rity Key/Passphrase for the router or access point.

All other Windows operating systems:

The network may not be broadcasting a Network Name (SSID). Open the

USRobotics

dx Configuration Utility, and click the Wireless Networks

tab. Click Add and select Use Utility (advanced network). Enter the network