Problem Possible cause Remedy
The condenser unit
service panel will not
shut.
The inner cover of the
condenser unit has not
been locked properly
and/or the condenser unit
has not been positioned
correctly.
–
Ensure that the
condenser unit is
positioned correctly and
lock the cover.
–
Check the rubber seals.
Water leaks from the
machine after the
condenser unit has
been cleaned.
Fluff has collected at the
bottom of the condenser
unit housing.
–
Use a cloth to remove
any fluff from the inside
of the condenser unit
housing.
The interior drum
lighting does not
come on.
The lighting switches off
automatically (to save
energy).
Switch the dryer off and
then on again.
The lamp needs
changing.
Change the lamp as
described at the end of this
section.
Check and fault indicator lights
Problem Possible cause Remedy
The Locked indicator
light flashes when the
appliance is switched
on and the programme
cannot be started.
The system lock is
activated.
If you wish to use the dryer,
the system lock must be
deactivated (see
"Electronic system lock").
Problem solving guide
32
