
Before using for the first time
13 14 15 16
22 21 20 19 18 17
Programming the water softener
Your water hardness leve! must be
programmed into the dishwasher using
the buttons on the control panel.
[] Make sure the dishwasher is turned
off.
[] Press and hold the "Start/Stop" button
(17) and at the same time turn on the
dishwasher with the "On/Off" button
(! 3). Release the "Start/Stop" button
within two seconds.
The "Rinse" (16)indicator and a
program indicator will light and the
"Salt" (!5) indicator will flash.
If this is not the case, the above steps
must be repeated.
t - 22 gr/gaJ:
[] Use the program selection buttons
(!9) to select the program which
corresponds to the water hardness in
your area,
Table t
gdgal*
1- 4**
5- 7
8 - 10
11 -13
14 - 16
17 - 22
ppm
20_ 70
90 - 130
140 - 180
200- 230
250- 290
310- 400
* US gallons
** Factory preset
To store the programmed water
hardness:
[] Press the "Start/Stop" (17) button
twice_
[] Turn off the dishwasher.
Program indicator
Pots & Pans
Sarfi Wash
Normal Plus
Normal
Economy
Rinse & Hold
15