Delay start
The start time of a programme can be
delayed, e.g. to benefit from economy
rates of electricity. A delay start time of
between 30 minutes and 24 hours can
be selected. The delay start time is set
in 30 minute steps.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed.
^ Open the door.
^ Switch the dishwasher on with the -
button.
The - indicator light will come on.
^ Select the programme required with
the programme selector button.
^
Press the , button.
The last delay start time used will
appear in the display. The , indicator
will light up.
^
Set the required time using the ,
button.
If the , button is kept pressed in, the
time will increase automatically up to
24:00 h. To start at 30 minutes again,
press the , button twice.
^
Close the door.
If, after you have set the delay start
time, you do not close the door within a
few seconds, the display will revert to
showing the programme duration. You
will have to enter the delay start time
again.
The delay start time then counts down
to the start time selected in minute
stages.
At the end of the delay period, the
programme selected begins
automatically. The In-operation control
light will come on.
Starting a programme before the
delay start period has elapsed:
A programme can be started before the
delay start period has elapsed.
Proceed as follows:
^ Open the door.
^ Switch the machine off with the -
button.
^
Switch the machine on again with the
- button.
^
Select the programme required with
the programme selector button.
^
Start the programme by closing the
door.
The In-operation indicator light comes
on to show that a programme has been
started.
Additional functions
39
