17
Washing Programs
ent
Close the lid Finish Caution & Note
priate
tergent
the
.
riate
ergent
the
• The pulsator rotates for
8 seconds to detect the
laundry load.
• Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.
• Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.
• When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.
• If water is already in the tub, or
putting wet laundry into the tub
before starting will increase the
WATER LEVEL.
• With lightweight bulky loads,
WATER LEVEL can be set low.
• Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.
(refer to page 14)
• When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
• Washing with HOT water may
damage the laundry (Water is set
to cold automatically). Ensure that
the load is under 2kg.
• In order to avoid damage to
laundry,
the spin cycle may appear slow.
This also avoids wrinkles and
clothing may still contain some
water. This is normal.
r the
g
mild
ed for
l.
• When static pressure of water is
more than 2kg/cm
2
, the QUICK
WASH course will be within
19min.
Maximum
Load
Less than
18.0 kg
Less than
2.0 kg
Less than
2.0 kg
Less than
18.0 kg
Less than
18.0 kg
RECOMMENDED LOADS
