
When the water supply is bad, check substances like stone or sand in the filter.
If the filter is clogged with dirt, water cannot flow into the washer. Clean the filter regularly.
Cleaning the filter in the inlet valve
Before cleaning the filter in the inlet valve, completely remove the water remaining in the water hose.
1 3
l
Turn off the water tap and put on the power
switch.
l
Select cold & hot water and press
START/PAUSE button. Let the washer operate
for 5 seconds
.
Disconnect water hose, and remove filter from
the inlet valve by hand or with tools. Remove
dirt with a tooth brush and clean in water.
2
Switch off the washer and disconnect the power
cord.
l
Then insert it back into the water inlet.
C
leaning and Maintenance
If the magic filter is damaged, purchase a new one from LG Authorised Service Center.
To Clean the Magic Filter
1
2
3
4
5
6
(BACK SIDE)
25