Problem Possible cause Solution
The shaving unit is soiled
or damaged to such an
extent that the motor
cannot run. In this case,
the shaving unit symbol,
the tap symbol and the
exclamation mark ash.
Clean the shaving
unit or replace
it (see chapters
‘Cleaning and
maintenance’ and
‘Replacement’).
The temperature of the
shaver is too high. In this
case, the shaver does not
work and the exclamation
mark on the display ashes.
Switch off the shaver
and let it cool down.
As soon as the
temperature of the
shaver has dropped
sufciently, you can
switch on the shaver
again.
The shaver is not
entirely clean after
I clean it in the Jet
Clean System.
The cleaning uid in the
cleaning chamber is soiled.
Empty and rinse the
cleaning chamber
and rell it with new
cleaning uid.
The cleaning uid level is
too low. If the uid volume
in the cleaning chamber
drops below the minimum
level during the cleaning
program, the program
aborts.The cleaning light
and the ‘cleaning chamber
empty’ symbol ash at
intervals and the holder
returns to its starting
position.
Rell the cleaning
chamber with
cleaning uid to
a level between
the two lines (see
chapter ‘Cleaning
and maintenance’).
ENGLISH 31
