Tempstar LT/NB/S Technical Manual 7610-003-61-42 B
Issued: 10-08-2008 Revised: N/A
TEMPSTAR INCOMING PLUMBING/OUTLET PLUMBING ASSEMBLY/WPRK KIT OPTION
Water Pressure Regulator, 1/2" NPT
Gauge, Pressure, 0-100 PSI
Tee, Brass, 1/2" NPT x 1/2" x 1/4"
Valve, Solenoid, 1/2" NPT
Bracket, Booster Plumbing 1/2” (Not Shown)
Bushing, HEX 3/4 MNPT-1/2 FNPT Brass
Adapter, 1/2” MNPT x CU Male
When servicing plumbing components, take care not to damage the threads of each individual item. Damaged threads can
cause leaks and loss of pressure, which could adversely effect the performance of the Tempstar dishmachine. It is strongly rec
ommended that teflon thread tape, used in conservative amounts, be applied to threads when joining components together. It
is not advised to use thread sealing compounds, sometimes referred to as “pipe dope”. Compounds can be ejected from the
threads during the tightening process and become lodged in key components, thereby rendering them useless. Some of the
components include the solenoid valve and the pressure gauge isolation ball valve.
Nipple, 1/2” NPT, Close, Brass
