Binding margin is in the wrong place
1. Open the Print dialog box.
2. Select the Two-Sided Printing pane.
3. Verify that the correct binding has been selected:
–The Book button is selected for binding along the side.
–The let button is selected for binding along the top.
Only one side of the page prints when the two-sided printing option is enabled
Verify that the following conditions exist:
● The correct print options are set in both the printer software and the software
program that you are using.
● The photo paper is not curled, if you are printing on two-sided photo paper. Photo
paper should be flat before printing. See storing and handling photo paper for more
information.
● The paper size selected in the Page Setup dialog box is supported by the duplexer.
● The paper type selected in the Paper Type/Quality pane is supported by the
duplexer.
See the duplexer specifications for a list of supported paper types and sizes.
Auto Two-Sided Print Accessory with Small Paper Tray specifications
Dimensions when attached to printer
219.3 mm (8.63 in) tall x 320.5 mm (12.62 in) wide x 142.1 mm (5.6 in) deep
Duplexing specifications
For duplexing specifications, including skew, media weight, and media sizes for paper
fed into the printer through the printer In tray, see the Automatic Two-Sided Printing
Accessory specifications.
Small paper tray specifications
Media thickness: 7-12 mils
Media sizes:
● Size range:
– Width: 81.3 to 106 mm (3.2 to 4.17 in)
– Length: 116.8 to 304.8 mm (4.6 to 12 in)
● Cards:
– 10x15 cm, 10x15 cm with tab
– 4x6 in, 4x6 in with tab
– A6, 105x148 mm
– Index card, 4x6 in.
– L, 89x127 mm
● Photo paper:
– 10x15 cm, 10x15 cm with tab
– 4x6 in, 4x6 in. with tab
User's guide 123
