11
Connecting the Signal Source
This section describes connecting the signal source
for TV.
Connect the signal source for the TV by using the TV (in)
coaxial connector or the S-VID IN (s-video) connector:
■ Plug the connector of a coaxial cable from your TV
antenna or from your TV cable (wall or set-top box)
into the TV connector on the back of the PC, and then
turn the connector to tighten it.
Or
■ Plug a cable into the S-VID IN connector on the back
of the PC: use an s-video cable (not provided) or use
the s-video to composite video adapter cable and
the composite video cable. Plug the other end of the
cable into your set-top box, VCR, or other device that
is providing the signal source for the TV.
You can also plug audio cables (not provided) from your
set-top box or VCR into the Audio in right (red) connector
and the Audio in left (white) connector on the back of
the PC.
n
Select the signal
source for TV in
the Media Center
program settings.
TV in
S-VID IN
(s-video)
Right audio in
(red)
Left audio in
(white)
Setting Up
