3
Table 2 Output cable configuration for RPS500-A3 and RPS800-A
Cable type Code
Type of output
interface (in
direction A)
Type of output
interface (in
direction B)
Length
CAB-RPS-1m-3026C 0404A03C
CAB-RPS Pwr-1m-H2X7 0404A033
CAB-RPS500/800-1m 0404A08G
H2*7 (4.20) H2*7 (4.20)
CAB-Pwr-1m-PS3FP-I 0404A03V JD5-A H2*7 (4.20)
CAB-Pwr-1m-PS3FP-II 0404A03U JD5 H2*7 (4.20)
1 m (3.28 ft.)
NOTE:
A connector of direction A connects to the DC input socket of the switch, and a connector of direction B
connects to the DC output interface of the RPS unit.
Cables coded 0404A03C, 0404A033, and 0404A08G all use H2*7 connectors. Cables coded
0404A03V and 0404A03U use an H2*7 connector for direction B, and respectively a JD5-A connector
and a JD5 connector for direction A. Figure 1 dep
icts the appearance of H2*7 and JD5 connectors. A
JD5-A connector looks like a JD5 expect that a JD5 is a little bigger.
Figure 1 DC output cable connectors
DC Output Cables for RPS1000-A3/RPS1600-A
The RPS1000-A3/RPS1600-A comes with three types of output cables, as listed in Table 3. The output
cables of the RPS1000-A3 are required, and those of the RPS1600-A are optional.
Table 3 Output cable configuration for RPS1000-A3/RPS1600-A
Cable type Code
Type of output
interface (in
direction A)
Type of output
interface (in
direction B)
Cable
length
Maximum
output current
CAB-RPS
PoE-2m-JD5
0404A053 JD5 JD5
2 m (6.56
ft.)
25 A
CAB-RPS Non
PoE-2m -JD5-A
0404A054 JD5-A JD5-A
2 m (6.56
ft.)
8 A
