VigorIPPBX 2820 Series User’s Guide
349
Get Community
Set the name for getting community by typing a proper
character. The default setting is public.
Set Community
Set community by typing a proper name. The default
setting is private.
Manager Host IP
Set one host as the manager to execute SNMP function.
Please type in IP address to specify certain host.
Trap Community
Set trap community by typing a proper name. The default
setting is public.
Notification Host IP
Set the IP address of the host that will receive the trap
community.
Trap Timeout
The default setting is 10 seconds.
5
5
.
.
1
1
5
5
.
.
8
8
R
R
e
e
b
b
o
o
o
o
t
t
S
S
y
y
s
s
t
t
e
e
m
m
The Web Configurator may be used to restart your router. Click Reboot System from
System Maintenance to open the following page.
Index (1-15) in Schedule Setup - You can type in four sets of time schedule for performing
system reboot. All the schedules can be set previously in Applications >> Schedule web
page and you can use the number that you have set in that web page.
If you want to reboot the router using the current configuration, check Using current
configuration and click OK. To reset the router settings to default values, check Using
factory default configuration and click OK. The router will take 5 seconds to reboot the
system.
Note: When the system pops up Reboot System web page after you configure web settings,
please click OK to reboot your router for ensuring normal operation and preventing
unexpected errors of the router in the future.
