
|
Network configuration
27
|
devolo MicroLink dLAN Wireless
EN
4.2.6 Advanced
IP Address
Under 'IP Address', you can find all current settings for the IP address of the
access point. Whether you work with static or dynamic IP addresses depends
on the configuration of your network.
'Static': The initial IP address of the MicroLink dLAN Wireless access
point at the time of delivery is '192.168.0.252'.
'DHCP': Functions as a DHCP client; if you are running a router or DHCP
server on your network, which assigns the IP addresses, the MicroLink
dLAN Wireless can function as a DHCP client.
Also refer to the section 'General notes' at the beginning of this chapter.
'Allow upgrade upload': Should only be activated for downloading new
firmware, and should be deactivated for normal operation (default set
-
ting: deactivated).
Keep in mind that the settings you have configured only take effect if you con-
firm them by clicking Submit and restart the access point.
MAC Filtering
Under 'MAC Filtering', you can activate an additional security filter for your
WLAN network by entering the MAC addresses of the WLAN devices that are
to have access to the MicroLink dLAN Wireless. To do so, enable the 'Enable