5 Troubleshooting
20 SR 40 FLEXX
Problem Possible Cause Remedy
2. Interference from other wireless
systems, TV, radio, CB radios, or
defective electrical appliances or
installations.
2. Switch off interference sources or
defective appliances; switch trans-
mitter and receiver to different fre-
quency / use transmitter and
receiver operating in a different fre-
quency band; have electrical instal-
lation checked.
Momentary loss of sound
("dropouts") at some locations
within performance area.
• Antenna location. • Relocate receiver. If dead spots
persist, mark and avoid them.
6 Specifications
Receiving frequency 660 to 865 MHz
Modulation FM
Audio bandwidth 35 Hz to 20 kHz
T.H.D. at 1 kHz typ. 0.8%
Compander Yes
Signal/noise ratio typ. 110 dB(A)
Current consumption 115 mA/12 V
Power requirement 120/230 VAC, 50/60 Hz
Squelch threshold -100 dBm to -70 dBm, adjustable
Audio output bal. XLR and unbal. 1/4" jack: adjustable from mic to line level.
Output level at rated deviation: 500 mV rms
Size 200 x 190 x 44 mm (7.8 x 7.4 x 1.7 in.)
Net weight 665 g (1.5 lbs.)
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the Declaration of Con-
BDA SR 40 FLEXX_2008_Hex:Layout 1 01/21/2008 10:32 Seite 20 (Schwarz/Black Auszug)
