4. Web Management: Wireless and WAN Settings
35 AirLive WLA-9000AP User’s Manual
occupies 20MHz width. For 2 wireless devices to connect, they must use the same
channel. The number of available legal channels might be different between countries.
For example, Channel 149 to 161 are available only to United States and a few other
countries. If you are living outside EU, please change the country from the “Regulatory
Domain” option in this page. Below is the table list of channels and frequency.
Frequency Domain Channel Frequency (MHz)
36 5180
40 5200
44 5220
5.15 to 5.25GHz
U-NII Low
ETSI Band1
48 5240
52 5260
56 5280
60 5300
5.25 to 5.35GHz
U-NII Mid
ETSI Band1
64 5320
100 5500
104 5520
108 5540
112 5560
116 5580
120 5600
124 5620
128 5640
132 5660
136 5680
5.47 to 5.725GHz
U-NII World Wide
ETSI Band3
140 5700
*Super Channel is NOT available in EU countries
4.2.6 Security Settings
Operation Mode -> Setup -> Security Settings
Security settings allow you to use encryption to secure your data from eavesdropping.
You can select different security policy to provide association authentication and/or data
encryption. The WLA-9000AP features various security policies including WEP, 802.1x,
WPA, WPA-PSK, WPA2, WPA2-PSK, WPA-Auto, and WPA-PSK-Auto. Please note not
all security policies are available in all operation modes. For example, only WEP is
available currently in WDS Bridge mode and Client Ad hoc mode. All wireless devices on
the same network must use the same security policy. We recommend using WPA-PSK or
WPA2-PSK whenever possible. For WDS Bridge and Client Ad hoc mode, we
recommend using WEP-152 encryption.
WEP
WEP Encryption is the oldest and most available encryption method. However, it is also
