
16.2 Possible failures
Problems indicated by alarm codes
Message Possible solution
: the appliance does not
fill with water.
• Make sure that the water tap is open.
•
Make sure that the pressure of the water supply is not
too low. For this information, contact your local water
authority.
• Make sure that the water tap is not clogged or is fur-
red with lime-scale.
• Make sure that the filter of the inlet hose and the filter
of the valve are not clogged. Refer to 'Care and clean-
ing'.
• Make sure that the inlet hose is not damaged.
• Make sure that the connection of the water inlet hose
is correct.
: the appliance does
not drain the water.
• Make sure that the drain hose is not damaged.
•
Make sure that the drain filter is not clogged. Clean
the filter, if necessary. Refer to 'Care and cleaning'.
• Make sure that the connection of the drain hose is cor-
rect.
: please check the
door!
Make sure that the appliance door is not open or closed
correctly.
If the appliance is overloaded, remove
some items from the drum and/or keep
pressed the door while touching the 启
动/暂停 button until the indicator
stops flashing (see the picture below).
: the anti-flood device
is on.
The anti-flood device is activated:
•
Disconnect the appliance.
• Close the water tap.
• Contact the service centre.
: the mains supply is
unstable.
Wait until the mains supply is stable. The appliance auto-
matically starts operating.
ENGLISH 41