Operating Instructions
16
Detergent and Conditioners
Which detergent and conditioners?
Only use detergents and conditioners that are suitable for use in wash-
ing machines. Always follow the manufacturer's instructions.
Quantities of detergent and conditioners?
The quantity to be used will depend on:
• degree of soiling of the washing
• degree of hardness of the water supply
• load
2
If the manufacturer does not indicate the amounts to use for smaller
loads, for half-loads use a third less than the amount recommended for
a full load, and for smaller loads and EASY IRON use half the amount
recommended for a full load.
Please follow the detergent and conditioner manufacturers’ instruc-
tions for use and dosing recommendations.
Water softening
For medium to high water hardness (hardness class II upwards) a water
softening agent can be used. Refer to the manufacturer's instructions.
Then always add the appropriate amount of detergent (underdosing)
for hardness class I (soft). Your local Water Authority can advise you on
the hardness of the water in your area.
Water hardness details
Hardness class
Water hardness in °dH
(German hardness scale)
Water hardness in ppm
(Parts Per Million)
I - soft 0 - 7 to 125
II - medium hard 7 - 14 125 - 250
III - hard 14 - 21 250 - 375
IV - very hard greater than 21 greater than 375
