Instructions for use
34
The washing machine
vibrates during opera-
tion or is unstable.
The transport packaging has
not been removed.
Remove transport packaging
in accordance with the
installation and connection
instructions.
The height-adjustable screw
feet are wrongly positioned.
Adjust in accordance with
the installation and connec-
tion instructions.
There is very little washing in
the drum (e.g. only one
dressing gown).
This does not impair the
function.
The water could not be com-
pletely pumped out before
spinning because
the drain hose is kinked or
the drain pump is blocked.
Check the drain hose and
remove any kinks if neces-
sary, or clean the drain pump
and, if required, remove for-
eign bodies from the pump
housing.
Excessive foaming dur-
ing the main wash.
Probably too much detergent
was used.
It may be necessary to
reduce the amount of deter-
gent used. Follow the deter-
gent manufacturer's
recommendations.
Water is running out
from under the wash-
ing machine.
The screw connection on the
inlet hose is leaking.
Screw the inlet hose firmly in
place.
The drain hose is leaking.
Check the drain hose and
replace it if necessary.
The drain pump cover is not
correctly closed.
Close cover correctly.
Washing is trapped in the
door.
Stop the programme and
remove the washing caught
in the door. Restart the pro-
gramme.
The emergency drain hose is
not correctly sealed or is
leaking.
Seal the emergency drain
hose correctly (see section
“Carrying out an emergency
emptying”). Call your local
AEG Customer Service Centre
if the emergency drain hose
leaks.
Problem Possible Cause Remedy
