Operating Instructions
36
Remnants of detergent
are building up in the
detergent drawer.
Water valve not fully opened. Open the water valve fully.
Filter in the screw connec-
tion of the intake hose on
the water valve or on the
unit is blocked.
Close the water valve. Un-
screw the intake hose from
the water tap and from the
unit. Clean the filter.
The rinsing water is
murky.
The cause is probably a de-
tergent with a high silicate
content.
No negative impact on the
rinsing results, possibly use
liquid detergent.
No illumination when
pressing an additional
program.
The selected additional pro-
gram cannot be combined
with the set program.
Make another selection.
Only L (END) is illu-
minated from behind.
The washing machine is in
Stand-by mode.
Press any button.
Only X (DURATION) is
illuminated from be-
hind. A number bet-
ween 1 and 19 is
shown in the display X
(DURATION).
Start time preselection run-
ning. The washing machine is
in Stand-by mode.
If you press any button the
machine will leave standby
mode.
The program sequence
indicator flashes con-
stantly.
Program safeguard switched
on; The program selector was
accidentally readjusted dur-
ing the washing cycle.
Turn the program selector
back to the original position
(see "Program Saving“).
Problem Possible Cause Remedy
