Operating Instructions
33
Water is flowing out
from beneath the
washing machine.
The screw connection on the
intake hose is leaky.
Tighten the intake hose
screw connection.
The drainage hose is leaky.
Check the drainage hose and
replace it if necessary.
The washing solution pump
cover is not correctly closed.
Close cover correctly.
Washing in caught in the fill-
ing door.
Abort the program and re-
move the washing through
the door. Restart the pro-
gram.
The emergency emptying
hose is not correctly closed
or leaks.
Close the emergency empty-
ing hose correctly (see the
section "Carry out emer-
gency emptying“). Inform
Customer Service if the
emergency emptying hose
leaks.
The drain pump for the
washing machine runs
constantly - even when
the appliance is
switched off.
The Aqua Control anti-flood
system has been activated.
Turn off the tap, then re-
move the plug from the
mains and inform Customer
Service.
Conditioner was not
washed in, compart-
ment æ for care
agents is filled with
water.
Conditioner insert in the
compartment is not correctly
attached or is blocked.
Clean the detergent drawer,
attach the conditioner insert
securely.
Washing heavily
creased
Too mush washing probably
put in.
Pay attention to the maxi-
mum filling quantity (see
Program tables). In the case
of easy-care textiles, select
the program EASY IRON.
The washing has not
been spun as dry as
usual.
The washing was not able to
be distributed evenly in the
drum prior to spinning.
Always load the drum as ful
as possible with a combina-
tion of large and small items.
Problem Possible Cause Remedy
