Operating Instructions
25
3
With automatic program adaptation by the controller of the washing
machine, (quantity of washing, type of washing, imbalance recognition,
special rinse etc.) it is possible to stop or correct the counting of the re-
maining run time.
Display MOISTURE%/LOADING%
The following appear alternately at the display:
• The expected residual dampness of the wash-
ing at the end of the program. This value de-
pends on the set spin speed.
• Loading of the washing drum (in 10 percent steps.)
This value is only displayed in the case of the programs
COTTONS/LINEN and EASY CARES/EASY IRON.
The washing machine can recognise the load only fifteen minutes af-
ter a program start. As soon as a value for the load is pending the dis-
play alternates between residual dampness and load.
Drum overloads are indicated with values of over 100 percent
(e. g.120).
3
Due to differences in the fabric type and in the load quantity, in the
case of EASY CARES/EASY IRON and DELICATES, the washing reaches a
lower value for residual dampness than is the case with COTTONS/
LINEN.
Change the Spin Speed
During the washing program, the spin speed can still be changed or a
rinse hold can be set (display 0). Other settings cannot be changed.
Abort program
0 To abort the washing program prematurely, turn the program selector
to OFF.
3
With the button START/PAUSE, it is possible to interrupt the washing
program at any time and to continue it by pressing the button again.
The washing cycle is finished/Remove the washing
After a washing program has ended, END lights up on the program se-
quence display.
