Instructions for use
41
4. If you want to check whether the additional rinse is set:
– Turn the program selector to SHORT SPIN (KORT CENTRIFUG., ESSOR.
DELICAT).
– Briefly press the button SOAKING (INWEKEN, TREMPAGE).
The additional rinse is set if RINSE
+ (SPOELEN+, RINCAGE+) flashes on
the program sequence display.
Cancel Additional Rinse:
0 1. Turn the program selector to SHORT SPIN (KORT CENTRIFUG., ESSOR.
DELICAT).
2. Keep the button SOAKING (INWEKEN, TREMPAGE) pressed for at least
5 seconds.
As soon as the button is pressed, RINSE
+ (SPOELEN+, RINCAGE+)
flashes on the program sequence display. After 5 seconds, RINSE
+
(SPOELEN
+, RINCAGE+) stops flashing and lights up constantly for a
further 5 seconds.
3. While RINSE
+ (SPOELEN+, RINCAGE+) lights up constantly, release the
button SOAKING (INWEKEN, TREMPAGE).
After RINSE
+ (SPOELEN+, RINCAGE+) has stopped lighting up, the
additional rinse is cancelled.
3
An additional rinse increases water consumption and the program run
time.
Solution Cooling
It may be necessary to cool down the washing solution before pumping
off in order to avoid thermal damage to plastic drainage pipes.
3
The washing solution is cooled down at the end of the main washing
cycle before pumping off (by incoming cold water).
(This setting is only effective for COTTONS/LINEN (WITTE/BONTE WAS,
BLANC/COULEURS) at temperatures of over 40 °C.)
No solution cooling is set when the unit is delivered.
