21
Setting the Memory
Example: Program position
MEMORY 1 is to be given the
following program combina-
tion: LINEN/EASY-CARES 40
°C, 800 rpm, with PREWASH.
1. Turn the program knob to
LINEN/EASY-CARES.
2. Press the TEMP. key repeat-
edly, until 40 °C appears in the display.
3. Press the RPM key repeatedly, until 800 appears in the display.
4. Using the OPTION key V set PREWASH and press the OK key. A black
bar appears under the PREWASH symbol V.
5. Press the OPTION key repeatedly, until the SETUP symbol
B flashes.
6. Press the OK key. The display
changes to the Special Func-
tions level. Program memory
position MEMORY 1 is of-
fered first.
3 To change to another memo-
ry position, press the OPTION
key.
7. Press the OK key.
The program combination is now stored to program knob position
MEMORY 1 and in the future can be selected directly using the pro-
gram knob.
3 The Memory can be overwritten at any time with a new program com-
bination (see “Changing the Memory”) but cannot be deleted.
Changing the Memory
1. Put together the new program combination as required (for an exam-
ple, see “Setting the Memory”, steps 1 to 4).
2. Press the OPTION key repeatedly, until the SETUP symbol
B flashes.
3. Press the OK key.
4. Using the OPTION key select the memory position to be changed, e. g.
MEMORY 1.
5. Store the new program combination using the OK key.
LINEN/EASY CARE
12.45
Cycle end at
14.37
40C 800 aýýýýýaVýaýaýaýaýaýaýa
TEMP. C° T/MIN. OPTIONS OK TEMPS
Memory 1
Store program?
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. C° T/MIN. OPTIONS OK TEMPS
