If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
touch the Spoelen+ - Rinçage+
button and the Extra button
simultaneously the relevant indicator
comes on/goes off.
This option adds two rinses and the
display shows .
9.4 Soft Plus
Set the Soft Plus option to optimise the
fabric softener distribution and improve
the fabric softness.
This option increases slightly
the programme duration.
To activate/deactivate this option touch
the Temp.°C button and the TPM button
simultaneously until the indicator
comes on/goes off above the
indicator.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the AAN /UIT - MARCHE/
ARRÊT button for a few seconds to
activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Cotton programme .
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the cycle
duration.
10.2 Loading the laundry
1. Open the appliance door.
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry
in the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
www.aeg.com22
