
Problem Possible cause Possible solution
You did not remove the
stubborn stains before
you wash the laundry.
Use special products to remove
the stubborn stains.
Incorrect temperature
was set.
Make sure that you set the cor-
rect temperature.
Too much laundry load. Decrease the laundry load.
The drum is emp-
ty and the display
shows there is
some weight in
(J).
It is necessary to set a
tare.
Press button
1
to deactivate
the appliance and to activate it
again.
The drum is full
but the display
shows 0.0 kg (J).
You loaded the laundry
before to activate the
appliance.
Press button
1
to deactivate
the appliance. Empty the drum
and obey to the necessary
steps. (Refer to 'Loading the
laundry')
After the check, activate the appliance.
The programme continues from the
point of interruption.
If the problem occurs again, contact the
service centre.
If the display shows other alarm codes,
contact the service centre.
13. INSTALLATION
13.1 Fixing plate kit
(4055171146)
Available from your authorized dealer.
If you install the appliance on a plinth,
secure the appliance in the fixing plates.
Follow the instructions supplied with the
kit.
13.2 Unpacking
1.
Use the gloves. Remove the external
film. If necessary, use a cutter.
ENGLISH 29