
At programme start the display shows the duration programme for the
maximum load capacity. During the washing phase the programme du-
ration is automatically calculated and can be greatly reduced if the laun-
dry load is lower than the maximum load capacity (e.g. Cotton 60°C,
maximum load capacity 7 kg, the programme duration exceeds 2 hours;
real load 1 kg, the programme duration don’t reach 1 hour). When the
appliance is calculating the real programme duration a dot blinks in the
display.
Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water con-
sumption (li-
tre)
Approximate pro-
gramme duration
(minutes)
Cottons 60 °C 7 1.30 62 157
Energiesparen
Cotton Energy Saving Pro-
gramme 60 °C
1)
7 1.02 55 258
Cottons 40 °C 7 0.80 62 154
Synthetics 40 °C 3 0.50 57 110
Delicates 40 °C 3 0.53 50 100
Wool/Handwash 30 °C 1.5 0.25 45 56
1)
«Cotton Energy Saving programme » at 60°C with a load of 7 kg is the reference programme for the
data entered in the energy label, in compliance with EEC 92/75 standards.
7. OPTIONS
7.1 Temp.
Set this option to change the default
temperature.
Indicator = cold water.
The display shows the set temperature.
7.2 U./Min.
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin
phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
• The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
.
To drain the water refer to
‘At the end of the
programme’.
7.3 Trocknengrad
Press this button to set one of 3
automatic dryness levels proposed by
ENGLISH
15