13Prior to Using for the First Time
Setting electronically:
1. Press the ON/OFF button.
3 If the name of a programme stage is highlighted in the display, a dishwashing
cycle is active. First of all you must cancel the dishwashing cycle:
– Press the RESET button. CONFIRM CANCEL? appears in the display.
– Press the OK/START button. This cancels the dishwashing cycle.
2. Go to the WATER HARDNESS setting; see section “Adapting an option/setting”.
3. Set WATER HARDNESS to the right setting.
If the water softener is set electronically to “1” this switches off the display of
the REFILL SALT message.
Water hardness Adjusting the hardness setting
in °d
1)
1) (°d) German degree, measure of the hardness of water
in mmol/l
2)
2) [mmol/l] millimol per litre, international unit for water hardness
Range Manual Electronic
51 70
43 50
37 42
29 36
23 28
9,0 12,5
7,6 8,9
6,5 7,5
5,1 6,4
4,0 5,0
IV
2*
10
3)
9
8
7
6
3) On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting
19 22
15 18
3,3 3,9
2,6 3,2
III
5*
4
1
11 1 4 1,9 2,5 II 3
4 10 0,7 1,8 I/II 2
below 4 below 0.7 I
1
no salt necessary
