In daily use32
Interrupting or aborting a dishwashing cycle
Only interrupt a dishwashing cycle that is in progress if it is absolutely neces-
sary.
Interrupting the dishwashing programme by opening the dishwasher
door
1 Hot steam may escape when the door is opened. There is a risk of scalding.
1. Open the door carefully. The dishwashing cycle will stop, in the display: PLEASE
CLOSE DOOR
2. Close the door. The cycle will continue.
Aborting the dishwashing cycle
1. Press the RESET button.
In the display: CONFIRM CANCEL ?
2. Press the OK/START button.
The programme is cancelled. In the display: CHOOSE PROGRAMME
3. If you want to start a new dishwashing cycle, check whether there is any deter-
gent in the dispenser.
3 Turning off the dishwasher will only interrupt a selected dishwashing cycle, not
cancel it. The cycle will recommence after turning the dishwasher back on again.
Setting the delay start
3 With the delay start you can delay the start of a dishwashing cycle for
between 1 and 19 hours. First of all set the delay start and then the desired
dishwashing cycle.
1. Go to the DELAY START option; see section “Adapting an option/setting”.
2. Set the period by which you wish to delay the start in hours.
In the symbol line of the display .
3. Press the OPTION button, to change to the Programmes menu.
4. Select programme and start.
First of all the pre-set time delay until the start runs down. In the display you
see the time remaining until the start of the dishwashing cycle. After the time
delay until the start has elapsed, the dishwashing cycle starts automatically, the
symbol goes out.
Cancelling a delay start:
You can cancel a delay start that is counting down at any time.
1. Press the RESET button.
In the display: CONFIRM CANCEL ?
