© 2009 American Honda Motor Co., Inc. – All Rights Reserved. BII 42539 (0908) 1 of 3
08P00-TK4-2000-91
BII 42539
Publications No.
Issue Date
INSTALLATION
INSTRUCTIONS
Accessory Application
SPLASH GUARDS 2010 TL
AUG 2009
PARTS LIST
Left front splash guard
Right front splash guard
Left rear splash guard
Right rear splash guard
Left rear bracket
Right rear bracket
8 Self-tapping screws
2 Clips
2 Rear brackets
TOOLS AND SUPPLIES REQUIRED
Stubby Phillips screwdriver
90° Phillips screwdriver
INSTALLATION
NOTE:
• Splash guards cannot be installed with side and rear
under spoilers.
• These installation instructions show the left splash
guards being installed. The same procedure applies to
installing the right splash guards.
• Clean and wax the areas to be covered with a high-
quality paste wax.
Installing the Front Splash Guards
1. Turn the steering wheel fully counterclockwise.
2. Remove the four self-tapping screws and one clip
from the left front inner fender.
FRONT
CLIP
(Discard.)
4 SELF-TAPPING
SCREWS (Reuse.)
LEFT FRONT INNER FENDER
