
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 5173
17” Industrial wireless Panel PC
Removal and reinstallation of some of the components are described in Chapter 4.
4.3 INSTALLATION AND CONFIGURATION STEPS
The following installation steps must be followed.
Step 1: Unpack the PC5153/ PC5173.
Step 2: Set the jumper settings.
Step 3: Install HDD, CompactFlash® and CD drive.
Step 4: Mount the PC5153/ PC5173 flat panel PC.
Step 5: Connect peripheral devices to the bottom panel of the PC5153/ PC5173.
Step 6: Configure the system.
4.4 REMOVE THE BACK COVER
Remove all the retention screws on the back cover. Lift the cover up to remove
(Figure 4-1).