661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7152
14” short depth serverRMC 7152
14” short depth server
53
PC 5172
17-inch sunlight readable touch panel PC
ATA/IDE Configurations [Enhanced]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.
Disabled Disables the on-board ATA/IDE controller.
Compatible Configures the on-board ATA/IDE controller to be in compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up to 4 storage devices.
Enhanced DEFAULT Configures the on-board ATA/IDE controller to be in
Enhanced mode. In this mode, IDE channels and SATA channels are separated. Some legacy OS do not support this mode.
Configure SATA as [IDE]
The "Configure SATA as" option sets the configuration of the SATA ports.
IDE DEFAULT The SATA drives are configured as IDE devices and no enhanced functions are available
Configure SATA Channels [IDE]
The "Configure SATA Channels" option sets the order in which the IDE devices are configured.
Before PATA DEFAULT The SATA drives are configured before the PATA drives
Behind PATA The SATA drives are configured after the PATA drives
Legacy IDE Channels [PATA Pri, SATA Sec]
SATA Only Only the SATA drives are enabled.
PATA Pri, SATA Sec DEFAULT The IDE drives are enabled on the Primary IDE channel. The SATA drives are enabled
on the Secondary IDE channel.
PATA Pri., PATA Sec The IDE drives are enabled on the primary and secondary IDE channels. SATA drives are
disabled.
PATA Only Only the PATA drives are enabled. IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the status of the auto detected IDE
devices. The following IDE devices are detected and are shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the IDE devices installed in the system. If
an IDE device is detected, and one of the above listed four BIOS configuration options are selected, the IDE configuration
options shown in Section 5.3.2.1 appear.
