Acnodes Markası'nın Ürünleri

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7152

14” short depth serverRMC 7152

14” short depth server

PC 5172

17-inch sunlight readable touch panel PC

4.6.3 CD Drive Installation

To install a CD drive, please follow the steps below.

Step 1: Remove the back cover (Section 4.4).

Step 2: Attach the CD drive adapter to the CD-ROM if it is an IDE drive (if it is a SATA drive, proceed to Step 5:). Attach a CD

drive adapter to a CD drive by aligning the two retention screw holes in the CD drive adapter with the retention screw holes on

the rear side of the CD drive.

Step 3: Place two spacers between the CD drive and CD drive adapter.

Step 4: Insert two retention screws and secure the adapter to the CD drive (Figure 4-9).

Figure 4-9: CD Drive Adapter Installation

Step 5: Undo the optical drive bracket screws and remove the optical drive bracket.

Figure 4-10: CD Drive Retention Screws

Step 6: Remove the four screws from the optical drive bracket assembly. Remove the blank drive plate.