Section 19: eManager PROGRAMMING FOR emaGEN IN unite SYSTEMS
19-11
19.5 RING ROUTING
You must route trunk groups serving
e
maGEN
subscribers in the
unit
e
system to the
e
maGEN
hunt group, in order for incoming
external calls to utilize
e
maGEN
features.
Ring routing programming is described below, in Section 19.5.
NOTE
Divert calls to
e
maGEN
/IVM in the follow-
ing screens:
• Station Attributes (F-A) (DND forward
parameter)
• Interflow/overflow Programming Screen
(C-P-[Edit Units] icon) (Inflow port
parameter).
To ring route regular and half private trunk groups:
1. From the Trunk Groups heading, select the GR-RF Screen . The
program displays the REG.HP/GROUPS FEATURES Screen.
2. If there is an entry in the ATT Route parameter, delete it.
3. Enter the IVM Hunt group DN in the Day Route and Night Route
parameters for the appropriate trunk groups.
To ring route private trunks:
1. From the Private Trunks heading, select the Private Trunk Fea-
tures screen. The program displays the Private Trunk Features
P-T Screen.
2. If there is an entry in the ATT Route parameter, delete it.
3. Enter the IVM Hunt group DN in the Day Route and Night Route
parameters for the appropriate trunk(s).
To ring route TIE/DID trunks:
1. From the Programming screens menu select the DID Routing
screen heading. The program displays the DID Routing Screen.
2. If there is an entry in the ATT Assign parameter, delete it.
3. Enter the IVM Hunt group DN in the Day Routing and Night Rout-
ing parameters for the appropriate trunk groups.
