Section 18: FAX
18-7
ERR:Not able to send fax.
Menu 1 Digit /S:
This command checks the configuration of the current line and the
fax setup of the entire system. It checks whether the current line can
be used for on-line, and if other lines can also be used as on-line and
as return-call.
It returns one of the following values:
1. This line is equipped with on-line fax and there are no dedicated
faxes.
2. This line is equipped with on-line fax and there are also dedi-
cated fax lines.
3. This line is not equipped with on-line fax but there are dedicated
fax lines.
4. This line is not equipped with on-line fax, there are no dedicated
fax lines, but there are other on-line fax lines.
5. There are no fax lines on the system.
The current value returns as an entry in the Menu 1 Digit. You should
specify the five cases in the number boxes. According to the status,
the script goes to the relevant option; for example, if the return value
is 1 -- the script will continue to the line corresponding with entry 1.
Document Selection
The document can be selected in two ways:
• ChooseDoc - and a parameter indicating the number of digits to
receive.
You should record a message “Please enter document number”.
• Menu 1 Digit - record a message containing a list of available
documents.
For each document assign a corresponding menu entry, which
will go to a separate line in the script. This line should contain a
TransFax with a specific document number.
