www.shure.eu
www.shure.eu
United Kingdom, Ireland:
Shure Distribution UK
Unit 2 The I O Centre
Lea Road
Waltham Abbey EN9 1AS
United Kingdom
Phone: +44 (0) 1992 703058
Fax: +44 (0) 1992 703057
www.shure.co.uk
Europe, Middle East, Africa:
Shure Europe GmbH
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49 (0) 7262 92490
Fax: +49 (0) 7262 9249114
www.shure.eu
NEW
ULX-D Digital Wireless Systems
RF Carrier Range 470 – 932 MHz, varies by region
Image Rejection >70 dB, typical
Latency <2,9 ms (3,2 ms in High Density Mode)
RF Sensitivity -98 dBm at 10
-5
BER
Working Range 100 m line-of-sight Note: Actual range depends on
RF signal absorption, reflection and interference.
Audio Frequency Range 20 Hz to 20 kHz Note: Dependent on microphone type
Audio Dynamic Range Analog Output: >120 dB, A-weighted
(System Gain @ +10) Dante
™
Digital Output: 130 dB (typical), A-weighted
Total Harmonic Distortion <0,1%
(−12 dBFS input, System Gain @ +10)
Operating Temperature Range -18°C to 50°C
Note: Battery characteristics may limit this range.
Dimensions ULXD4: 171 x 197 x 42 mm, W x D x H
ULXD4D, ULXD4Q: 482 x 274 x 44 mm, W x D x H
Weight ULXD4: 0,9 kg, without antennas
ULXD4D: 3,36 kg, without antennas
ULXD4Q: 3,45 kg, without antennas
Power Requirements ULXD4: 15 V DC @ 0.6 A, supplied by external power
supply (tip positive)
ULXD4D: 100 to 240 V AC, 50-60 Hz, 0,26 A max.
ULXD4Q: 100 to 240 V AC, 50-60 Hz, 0,32 A max.
Gain Adjustment Range -18 to +42 dB in 1 dB steps (plus Mute setting)
Full Scale Output 6,35 mm: +12 dBV
XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
Network Interface ULXD4: Single Port Ethernet 10/100 Mbps
ULXD4D, ULXD4Q: Dual Port Ethernet 1 Gbps
Network Addressing Capability DHCP or Manual IP address, with or without gateway
Housing ULXD4: Galvanized steel
ULXD4D, ULXD4Q: Steel; Extruded Aluminum
Audio Frequency Range 30 Hz – 20 kHz
Gain Offset Range 0 – 21 dB (in 3 dB steps)
Battery Runtime @ 10 mW Shure SB900 Rechargeable Li-Ion: <12 hours
2 x AA Alkaline: <11 hours
Dimensions 256 x 51 mm, L x Dia. (with SM58
®
)
Weight 340 g, without batteries (with SM58
®
)
Housing Machined aluminum
Power 1 mW, 10 mW, 20 mW
See Frequency Range and Output Power table, varies by region
Antenna Type Integrated single band helical
Audio Frequency Range 20 Hz – 20 kHz
Gain Offset Range 0 – 21 dB (in 3 dB steps)
Battery Runtime @ 10 mW Shure SB900 Rechargeable Li-Ion: <12 hours
2 x AA Alkaline: <11 hours
Dimensions 86 x 66 x 23 mm, H x W x D
Weight 142 g, without batteries
Housing Cast aluminum
Power 1 mW, 10 mW, 20 mW
See Frequency Range and Output Power table, varies by region.
Antenna Type ¼ wave detachable
ULX-D Digital Wireless Specifications (Note: All specifications are subject to change.)
ULXD4
Digital Wireless Receiver
ULX-D
System
ULXD2
Handheld Transmitter
ULXD1
Bodypack Transmitter
©2012 Shure Incorporated 08/12
ULX-D
DIGITAL WIRELESS
AL1803SE
ULX-D Digital Wireless Systems
Lithium Ion rechargeability provides
up to 11 hours of use on a single charge,
while displaying battery life
in hours and minutes accurate
to 15 minutes.
Lithium Ion
Rechargeability
Signal stability with no audio artifacts
extends over the entire 100 meter line-of-
sight range using standard supplied dipole
antennas.
Signal
Stability
The 256-bit Advanced Encryption Standard
guarantees unbreachable privacy – for all
installations where secure transmission is
key. A new, unique, randomized encryption
key is generated every time encryption is
enabled.
Advanced
Encryption
Ethernet networking enables
streamlined setup across multiple receivers,
Wireless Workbench integration, frequency
coordination via Axient Spectrum Manager,
AMX and Crestron control as well as Dante
TM
digital networked audio.
Networked
Control
The 24-bit / 48 kHz digital audio
delivers incredibly clear and accurate
capturing of source material. It offers
a wide frequency range with flat response for
superb low range and transient response.
Transparent
24-Bit Digital Audio
Shure ULX-D Digital Wireless offers an expansive set of professional features for the most demanding installed applications.
Secure and reliable, it features transparent audio clarity and advanced encryption. Plus smart, rechargeable Li-Ion
batteries provide extended usage times and life cycles. ULX-D – The professional solution, wherever reliable and high-
performance installed sound is required.
PROFESSIONAL
INSTALLED WIRELESS SOUND
ULX-D receivers are available in single,
dual and quad channel configurations,
along with a wide selection of Shure
microphones to accommodate any size
installation.
Scalable
Hardware
1 2 4
Allows operating up to 560 (five hundred
sixty) channels in 72 MHz, respectively
63 channels in an 8 MHz TV channel over
standard mode at 1mW transmit power in a
working range up to 30 meters.
High Density
Mode
The signals from a common source via
two bodypack transmitters with different
frequencies are routed to receiver's audio
outputs. In case of RF interference,
switching between channels occurs in
milliseconds, without interrupting the audio.
Bodypack Frequency
Diversity – Dual/Quad only –
Combining of selected audio channels to
be routed to all selected outputs and allows
the receiver to function as a 2 or 4 channel
mixer. All XLR outputs of the selected
channels provide the summed audio.
Audio Summing
– Dual/Quad only –
ULXD4D
Digital Wireless Receiver
push
control
ENTER
EXIT
SCAN
power
RF
A B
OL
OL
gainaudio
RF
A B
OL
OL
gainaudio
RX1 RX2
IR
sync
sync
SEL
SEL
ULXD4Q
Digital Wireless Receiver
push
control
ENTER
EXIT
SCAN
power
RF
A B
OL
OL
gainaudio
RF
A B
OL
OL
gainaudio
RF
A B
OL
OL
gainaudio
RF
A B
OL
OL
gainaudio
RX1 RX2 RX3 RX4
IR
sync
sync sync sync
SEL
SEL
