Cabin Fuse Box Location
NOTE:
Insert a screwdriver wrapped with a protective cloth (A) into the slit (1). Pull to remove the fuse
box cover (2). Remove the fuse with the fuse puller (3).
7. Release the parking brake.
8. Turn the power switch OFF.
9. Release brake pedal.
To avoid possible personal injury or vehicle damage, use wheel chocks or take appropriate
steps to prevent the vehicle from rolling freely.
Be sure to firmly position wheel chocks when P (Park) position is manually released.
4-2.1 Reset Procedure
1. Install the 2 fuses removed previously.
2. Turn the power switch ON and wait 5 seconds without pressing the brake pedal. Ensure selector
lever is in the N (neutral) position.
3. If 12V battery is low voltage, please charge with battery charger.
4. Turn the power switch OFF and wait 5 seconds.
4-3 Storing the Vehicle
The service plug must be removed to shut down the high voltage system for storage.
Do not store a vehicle inside a structure. Keep the vehicle away from other vehicles if the
li-ion battery is severely damaged. There is possibility of delayed fire from a severely
damaged li-ion battery.
UP
METER 1
10A
11
3
2
A
AAYIA0151ZZ
34
