ENGINE – CAMSHAFT, VALVE STEM SEAL
11-5
O
O
Removal procedure
1. Oil feeder control valve connector
2. Oil feeder control valve
3. O-ring
4. Breather hose
• Secondary air control valve
(refer to Section 15-2: Secondary Air
Control System)
5. Centre cover
• Ignition coil
6. O
2
sensor connector
7. Crank angle sensor connector
8. Connection of the control harness
9. Vacuum hose
10. PCV hose
11. Connection of the radiator upper hose
12. Camshaft position sensor connector
(exhaust side)
13. Camshaft position sensor connector
(inlet side)
14. Connection of the earth cable
15. Rocker cover ASSY
16. Spark plug hole gasket
17. Rocker cover gasket
A
N
M
